The (Original) Wireless Set No. 19 Group Discussion Forum
Please use this area ONLY to discuss or ask questions from others about vintage military communications gear, NOT to post for sales, wants or other classified ads. Any such posts will be deleted. QM Stores is available for classified ads.
The high output voltage of the HP13 is 750-800V which is too high. It should be around 540-560V for the xmtr portion. The low output on the low tap is right on at 265V. Both outputs of the HP13 provide enough current so if the HT can be brought down it should work.
Thanks Bruce I figured on a voltage Divider and regulator Circuit to drop the HV to the proper level. Thank you for the response, If i could find the Original AC Supply for the Set that would be Great! Thanks Again Jeff W1AEA