Return to Website

Wizard Outboard Motor Forum

Welcome to the new Wizard Outboard Forum.

Wizard Outboard Motor Forum
Start a New Topic 
Author
Comment
View Entire Thread
Re: wizard oputboard

Here are pics of my WD3




My motor is missing the casting covering the spark plug, but most of these were taken off and lost.
The instructions for the WD4S are in this post.
They are spot on for running your WD3 except for the fuel mix.
You will probably need to replace the grease in the foot with lubriplate 105 and replace the impeller.

Re: wizard oputboard

Bryan Smith
Here are pics of my WD3




My motor is missing the casting covering the spark plug, but most of these were taken off and lost.
The instructions for the WD4S are in this post.
They are spot on for running your WD3 except for the fuel mix.
You will probably need to replace the grease in the foot with lubriplate 105 and replace the impeller.
Need a cowling for my WD-3...any suggestions?

Thanks. Steve