Return to Website

Wizard Outboard Motor Forum

Welcome to the new Wizard Outboard Forum.

Wizard Outboard Motor Forum
Start a New Topic 
Author
Comment
i need parts for a 14.1 wizard model # mLm 6915b. i need 2 ignition coils

I have a 1964 14.1 wizard motor that is a western auto. it was made by scott and I need 2 replacement coils for it. does anybody have any ideas that may help me. the model # mlm-6915b

Re: i need parts for a 14.1 wizard model # mLm 6915b. i need 2 ignition coils

Outboard magneto usually made by a specialist vendor such as Wico,Eisemann,Phelon
Bendix and others. Your outboard made as a Scott, Wizard and likely Sears. There are several online vendors of parts new and gently used. If you can not find
coils for your magneto it is often possible to adapt coils from other sources
to work....ask a member may turn up someone who has done an adaption into a
similar Scott made. It is also likely that same part number coils were used
on magnetos for a variety of brands and models.
Finding parts for old outboards is generally easier than you might think.
Once you know the magneto brand and model you have something a little more
specific to ask and look for.
Louis

Re: i need parts for a 14.1 wizard model # mLm 6915b. i need 2 ignition coils

ok i did find out it is a scott moter and all parts including the magneto are produced by phelon. if there is a wico coil or a seirra coil that will interchange please let me no. thanks

Re: i need parts for a 14.1 wizard model # mLm 6915b. i need 2 ignition coils

Here is some service information for it.