Return to Website

Wizard Outboard Motor Forum

Welcome to the new Wizard Outboard Forum.

Wizard Outboard Motor Forum
Start a New Topic 
View Entire Thread
Re: 1950's Wizard super power 25 timing

Thanks, serial # is 1016298 looks exactly like the picture on 1950's Western Auto ad at $ 399.50 I have magneto open to clean points and check it, and find #1 firing position, found a mark on flywheel, turned the engine to #1 TDC, maybe I can get lucky
Whish I knew about what year it is, the decal on side says four cylinders not Supper power 25, I removed engine to get mag. off twenty years ago, forgot all about it, the man that sold it to me then is making offers to buy it back, I am kinder found of the old engine looks well built, and was the fastest in it's days versus same size engine. Got me going in re-assembling it.
I am old, semi-retred,have a restoration shop, mostly old classic cars, lots of old British iron.Tech advisor for local British car club, if you ever need help that way. Jean-Pierre

Re: 1950's Wizard super power 25 timing

Points set at 0.010" + 0.000 -0.002" in other words no less than .008" nor more
than 0.010" Service Manual indicates same for both Fairbanks Morse and the
Kiekhaefer 4D series. Kiekhaefer (Mercury) introduced their own brand of
4 cylinder magneto in late 1950's as a unit they will interchange but the parts
are different. Be careful of the plastic cap,rotor and cover as they are
not easily found or inexpensive. The timing is draw line between center of
shaft flywheel is mounted on and the center of shaft magneto gear is
mounted on with arrow on magneto gear and timing mark on flywheel aligned
and under the line. So the book seems to say anyhow. I have had magneto
parts and partial magnetos but never had need to assemble one.
You really should consult the manual as there is more to do to get it spot on
and ready to run.
Manual mentions several different rotor and cover sets (apparently improved)
but do not mix...installed as matched sets...different colors. If you have the
original parts and they are good not a problem...something to watch for if
sourcing replacements. Timing belt should be inspected as if original may not
fit to use. Much of the Wizard 4 cylinder is similar to Mercury Mark 30
Several on line dealers should be able to supply sure to mention
for a Wizard and Magneto model...both Fairbanks Morse and Kiekhaefer magnetos
may have some variations which may/may not make a difference. ASK
We in the life experienced generation are about the only ones who like to figure out and fix up old stuff. Today's task here was to assemble Model A Ford generator. Tomorrow's task is to install and road test. It took a lot of
mental effort to figure out how to do it. Parts locating about as simple as
turning on computer and getting out credit card. I have been fiddling with
outboards for a few years so the taking apart and cleaning part came easy enough but picking up on problems not as easy. As in outboards when cleaned up fixed up,painted and working it is worth the effort.

Re: 1950's Wizard super power 25 timing

Thanks for all the tip, where can I purchase a manual or a copy of one.

Re: 1950's Wizard super power 25 timing

There are new reprints of Mercury 1965 and Prior Models available from several
on line suppliers and there are moldy oldy greasy dirty copies of variout
vintages "out there" There is also DVD offered on line (ebay) at a very
nominal sum that MAY include desired information...ASK. Put an ad in
webvertize at aomci site and take a look at ebay
Mercury Service Manual part number is C-90-25500.
Since the catalog was written for dealer mechanics in the 1960's to cover no
longer current product you find mention of Mercury Service Tools and the obvious
(to mechanics anyway) left out. Left unmentioned are stuck fasteners and
broken or missing items...fairly new motors did not have the "stuck"
issues and parts were either at parts counter or available in a few days
from distributor.
You may find it helpful to look up Mercury Parts Manual for Mercury Mark 30
online New York AOMCI chapter. Mercury and Wizard versions of same basic
motor were NOT exactly the same but broadly similar.
If there is an active AOMCI chapter in your area see if there is a swap meet
coming up. You may even want to join after looking things over.

Re: 1950's Wizard super power 25 timing

A .PDF file of a free manual is available:

Go to:

Log in with:

User ID: marshall

password : public

-----Go under the Small Engine Repair Reference Center (look for the wrench), then Marine/Boat will click on Mercury in the 2nd column and then click on 4 Cylinder models (1955-1965).