Return to Website

Wizard Outboard Motor Forum

Welcome to the new Wizard Outboard Forum.

Wizard Outboard Motor Forum
Start a New Topic 
Author
Comment
View Entire Thread
Re: Wizard 3.6hp number on mount 2814

Thanks I will put a photo up soon

Re: Wizard 3.6hp number on mount 2814

The motor turns freely and seem to have good compression but no spark I have pulled the flywheel.Point look good but the coil has cracks in the covering.

Re: Wizard 3.6hp number on mount 2814

Cracked cover of coils often means coil is history. Some have had luck with
recovering. Flywheel and or magneto plate are usually marked for maker
and model...generally supplied by a vendor such as Repco Phelon,Wico,
Eisemann,Fairbanks Morse...Replacement coils "are around". Points usually can be cleaned up, condenser usually easily found as all you need is something of correct rating, that will fit space available and has a long enough pigtail to reach connections.
Flywheel nut 400 INCH pounds...about 33 FOOT pounds
Louis

Re: Wizard 3.6hp number on mount 2814

Thank you Louis I will be checking on those next. I am working on a Canoe with my Granddaughter right now.