|
Wizard Outboard Motor Forum
Welcome to the new Wizard Outboard Forum.
|
|
| Return to Website | ||
 First |
 Prev |
 Reply |
 Home |
Next  |
Last  |
| Viewing Page 1 of 1 (Total Posts: 4) |
| Author | Comment |
Brian Mahoney
IP: 75.8.37.153 May 24, 08 - 10:40 PM |
Recoil needed
Wanted recoil for Wizard, has 3 mounting bolts & fits WF7, WG7 or WH7 Thanks |
|
jpatti75
IP: 24.255.119.157 May 25th, 2008 - 8:39 AM |
Re: Recoil needed - used parts guys
Brian- The recoil you need was used on the Mercury equivalents of the Wizards -- the KE7, KF7, KG7, and KH7 models. I would try emailing the following gents who sell parts and complete vintage outboards. Doug Penn (Douglas.Penn@gmail.com) -- I use Doug for most of my parts needs. He is very reasonable, ships quickly, and is a super nice guy. Bob Grubb (Bob@grubb.com) - Bob is trying to fully retire and wants to get rid of all his parts/motors, and I bet he would have a recoil from one of the above models. Ideally he wants to sell off his parts in a large lot, but he might be willing to help you out. If this doesn't work, post a free wanted ad on the AOMCI.org "Webvertize" page. Good luck! JP |
|
Brian Mahoney
IP: 75.7.240.193 May 25th, 2008 - 3:07 PM |
Re: Recoil needed
Thanks for the leads JP, but the recoils will only fit those models I mentioned and KG9. I doubt anyone would rip apart a KG9 for this. Merc recoils are inset (flush) to the gas tanks (with 3 bolts) where Wizards set on top of the gas tank. |
|
jpatti75
IP: 24.255.119.157 May 26th, 2008 - 10:41 AM |
Re: Re: Recoil needed
Sorry on the models....it can be confusing with the Mercury Wizards....they don't all equate back to the Mercury powerheads they are based on. I would still recommend giving Doug or Bob a holler. If any guys have a KG9 for parts, they will. If you haven't already done so, try a wanted ad on the AOMCI.org website (see Webvertize link). Good luck! JP |
| First |
Prev |
Reply |
Home |
Next |
Last |
bravenet.com