|
Wizard Outboard Motor Forum
Welcome to the new Wizard Outboard Forum.
|
|
| Return to Website | ||
 First |
 Prev |
 Reply |
 Home |
Next  |
Last  |
| Viewing Page 1 of 1 (Total Posts: 3) |
| Author | Comment |
Greg Mead
IP: 71.31.102.97 Apr 27, 08 - 9:09 PM |
WF-4 Screws to mount Cowls to motor needed
Hello, I got a set of cowls at a swap meet ,but did not have the screws to mount them together and the four to mount them to the motor. I do not want to use hardware store screws unless it is all there is. I guess what I am asking is Does anyone have a few screws loose. Thanks for the great advise on this forum, I really appreciate it, Greg Mead |
|
jpatti75
IP: 68.100.84.204 Apr 27th, 2008 - 10:36 PM |
Re: WF-4 Screws to mount Cowls to motor needed
Greg- Those screws are likely a non-standard size that will be hard to track down at a hardware store. I had to special order special cowl screws for mine. I can't guarantee that your screws are the same as mine, but Mercury commonly used 1/4"-28 screws, and the length is probably 3/4". 28tpi is really hard to find. Unless someone has some to mail you, you may want to try: http://www.boltdepot.com/ The screws are cheap...it's the shipping the shipping that hurts! Good luck! JP |
|
Greg Mead
IP: 71.31.102.97 Apr 29th, 2008 - 11:58 AM |
Re: WF-4 Screws to mount Cowls to motor needed
Hello, You are right. The screws are 1.70 for four with washers,but 12.00 shipping, I think not. I will come up with something. Thanks, Greg |
| First |
Prev |
Reply |
Home |
Next |
Last |
bravenet.com