|
Wizard Outboard Motor Forum
Welcome to the new Wizard Outboard Forum.
|
|
| Return to Website | ||
 First |
 Prev |
 Reply |
 Home |
Next  |
Last  |
| Viewing Page 1 of 1 (Total Posts: 2) |
| Author | Comment |
Frank H
IP: 68.33.236.187 Apr 4, 08 - 7:29 PM |
Wizard wg4
model no is wg4 ser 723816 just a few questions if it'sok 1 help with year tried to look up year no luck 2 cant figure out the oil mix and should i use the motor oil in place of 2in1 oil 3 where a good place for parts. thanks in advance p.s. look around forum for my answers first but no luck |
|
Louis
IP: 64.12.117.72 Apr 22nd, 2008 - 2:10 PM |
Re: Wizard wg4
Same vintage Mercury versions used 3/8 pint of Mercury QuickSilver oil to gallon of non leaded gas That is 6 fluid ounces oil to 128 fluid ounces gas... works out about 1 to 21 and 1/3. You can either stay with traditional nondetergent motor oil (not always on shelf) or you can try a quality TCW-3 (some mix the two). Stay close to correct ratio...slow running and too much oil will foul spark plugs...Mercury ratio for racing was twice as much oil per gallon... |
| First |
Prev |
Reply |
Home |
Next |
Last |
bravenet.com